• False Ceiling and Ceiling Moldings

False Ceiling and Ceiling Moldings

False ceiling today is not only restricted to basic rectangular or square design type. With modern homes n interiors, homeowners have become more aware for how designer false ceiling can make difference to their modern interiors.

Other than square/ rectangular false ceiling homeowners who have high budget opt for-
(i) curvature/ curved false ceiling or
(ii) Rafters false ceiling design.

These designer False Ceiling are not frequently made or asked for since they turn out to be an expensive affair. Also it takes longer time then the basic rectangular false ceiling. But what type of False ceiling is to be done depends on homeowner’s budget.

A Tip

For homeowners with no budget issue, rafters or curvature false ceiling is suggested.

For those with budget, we suggest them to opt for plain ceiling i.e. their original one. But here we can add style to their ceiling by having molding done on sides.

What is ceiling molding or crown???

Firstly let’s see what is molding.

Molding also called as coving, is a strip of material with various profiles used to cover transitions between surfaces or for decoration. It is traditionally made from solid milled wood or plaster, but may be made from plastic or reformed wood.

Crown molding or Ceiling Molding is one of the most inexpensive way to add style and elegance to your room. There are different types of crown molding depending on the type of style a homeowner is seeking.

Crown Molding

Crown molding is a form of millwork typically applied along the seams where ceiling meets the wall. It is the most common type of ceiling molding available in many sizes and profiles too. Typically, the larger the room and also higher ceilings, the larger width of crown molding can be used without overpowering the room.

Ceiling Molding

Ceiling molding is a form of millwork applied on ceilings. There are various types of designs and styles in ceiling molds. Homeowners can choose as per their choice of design, budget, style and ceiling size.

Installation of Ceiling Molding :-

• Firstly homeowners chooses design for the ceiling.
• A contractor or we then make frame of the design selected. This frame is made of Steel or Aluminum.
• Once this framing is done, the design is drawn on wood.
• Later marking takes place as to where it is to be installed.
• The molding is then installed on ceiling using tools.
• Once the moldings are installed, the design is painted.

One Comment

  1. Vihang Joshi 3 October 2017 at 10:46 pm - Reply

    I want to do crown moulding in aluminium section for indirect lighting can you provide the service in pune
    Pl contact 9923102022

Leave A Comment